Engine data management 700 which can simply be referred to as EDM 700 is a necessary addition to any aircraft. It works by continually monitoring the engine activities of the aircraft thus, leaving the pilot to fully concentrate on flying and landing the aircraft safely. With the help of the latest microprocessor technology, a total of 24 critical parameters are monitored 4 times a second which is more than can be done by the pilot.
The EDM 700 system is also able to instantly give warning when programmed limits are exceeded. This is possible because it is equipped with an up to date warning system. It is the most accurate, advanced engine monitoring system in the world that gives assistance in all engine related areas to ensure that the operations of the aircraft run smoothly.
Features of EDM 700
Some basic but important features of EDM 700 include
• Accurate trend monitoring is achieved in the normalized mode
• Presence of bus voltage to accurately detect any voltage loss from failure of the alternator
• Troubleshooting can be achieved from the cockpit with the aid of a computer that displays problem codes
• Presence of alphanumeric scanning that displays 29 functions
• 2 different modes – Lean Find mode that searches for the first last of the cylinders to peak and the Peak Find that captures the exhaust gas temperature.
• Programming is easily achieved from the from panel using just two buttons
• Accurate leaning is guaranteed fast prove response
• Temperature: It is displayed in one degree in either Celsius or Fahrenheit
• True memory: data can be downloaded from the EDM onto a laptop or palm computer.
• 29 alarms
• EGT graph has variable scaling
• Fuel flow option
• Shock cooling
• Oil Temperature check
Specifications for EDM 700
The EDM 700 Engine Monitor system has both important and optional specifications that perform standard and optional functions.
The important standard specifications include
• Linear gauges: selectable position options
• Power connector
• Shock cooling
• LOP/ROP Leaning Mode exclusive to JPI
• 100 hours downloadable data recording
• Exhaust Gas Temperature (EGT) 4 or 6 probes
• CHT 4 or 6 probes
The Optional Specifications Include
• Oil Temp Probes
• Outside Air Temperature (OAT)
• Oil pressure
• Aircraft Fuel Flow Indicator – USED, Remaining, GPH Endurance, GPS destination
• 1 gigabyte USB stick for downloading data
Other specifications of the EDM 700 include
• The EDM 700 IS 2.5 x 2.5 x 8? with 2 1/4 bezel, including the connector.
• TSO C43b, Temperature Indicator EGT Probe-701 14.5 oz. / 0.9 lbs
• Wire P.N. WK.-24 Harness 8 ft. 14.0 oz. each / 0.88 lbs
• EGT Probes MM-111 2.0 oz. each / 0.125 lbs
• RPM Sensor 1.5 oz. / .094 lbs
• CHT probe 5050 1.5 oz. each / 0.094 lbs